Desiccant

Production information

During the transportation, did you encounter the following conditions:
Carton softening, container water droplets (container rain), equipment metal rust, damp and mildew...

 

What is container rain?

During the transporation, the container is a confined space. The temperature during the day is above 40°C, and the temperature drops to 0°C at night. The temperature difference will condense the water vapor in the closed container into water droplets, which is called container rain.
The formation of container rain will cause cartons to become soft and collapse after absorbing water, machine parts rust, goods moldy... etc. To avoid these problems, using a powerful container desiccant is your best choice.


                                                                                                                                   
Daytime temperature
  40°C above

temperature at night may drops to 0°C
The temperature difference will condense the water vapor in the closed container into water droplets

 

 

 

 

Specification

main ingredient: high efficiency Calcium chloride


Applications

Leather products, textiles, wood products, household products, electronic products, furniture, metal products, paper products, machinery and equipment, food, agricultural products...etc.

 

Recommended usuage

20ft container: 4~6 rolls
40ft container: 8~12 rolls
40ft HQ container: 10~14 rolls
Special products or in case of rainy season, the dosage increaseubg is considerable

 

STEP 1：Seal the ventilation holes of the container with tape,
Prevent moisture in the air from entering
and ensure the tightness of the container

STEP 2：Hang the desiccant on the hanging ring
on the inner wall of the container.

STEP 3：After hanging the desiccant,
quickly load the goods into the container

 STEP 4：After the goods are loaded, quickly close
the container door, ensure that the inside is sealed
 
 

 
 

Notice：

  1. Check whether the container is damaged, such as holes or cracks in the walls, roof or bottom of the container
  2. Check the moisture level of the wooden floor inside the container. If possible, do not use containers with wood boards with a moisture value of more than 20%, which will increase the moisture rate.
  3. Seal all vents of the container, do not let the goods and the desiccant stick together, let the desiccant leave enough moisture absorption space, it is very important! ! !
Back